In Germany phyphox is quite popular in physics education.
However on android the sampling rate of the acceleration sensor is limited to 50/s. At least if you install through the official app store.
[1] https://iopscience.iop.org/article/10.1088/1361-6552/aac05e
My understanding is that it’s the same even on iOS (or at least on my iPhone SE 2020). More specifically, the output only measures till 50hz (but the sensor sampling rate is actually 100hz - Nquist, you need double the measured frequency as sampling frequency, yada yada.)
The sensors have analog lowpass filters that can be adjusted in order to avoid aliasing.
In general, with more bandwidth you can do more intrusive things. But if you want to tell wether two people ride in the same car, 50 Hz should be sufficient anyways.
Phyphox has a smartphone sensor database:
Edit: no, it can't have. Then the phone sensor database would show that since it is built from submissions within Phyphox: https://phyphox.org/sensordb/
I'm not sure what problem you're running into (perhaps a very unusual phone that has only a 50 Hz accelerometer) but Android/Phyphox can do way more than 50 Hz
Sadly, since most smartphone magnetometers seem to have a sample rate of 100/s, this will not be applicable to Americans and everyone else with a 60 Hz grid frequency, the 50 Hz were already at the Nyquist–Shannon limit.
The trick should work fine, but you may confuse the 60Hz signal with a 40Hz signal [1] [2].
This should work for higher frequencies too, but if the frequency is toooo high the problem is that the magnetometers averages a short period of time (or use a window) instead of being an actual an instant measurement.
[1] Calculated using my fingers moving in the air. 60=50+10 -> 50-10=40. I think it's 40Hz, but I would need a pencil and paper to be sure.
(I've been meaning for ages to write a piece of software that's able to extract change over time data from a video of a 7 segment display, like on a balance or a digital thermometer or something)
My parents have a sound bowl, and I wanted to know the resonance frequency. Took an audio spectrum, zoomed in on the first peak, read the frequency (iirc it was around 208 Hz).